Pumping Station Enquiry Specification Form

Pumping Station Enquiry Specification Form

To enable us to advise on the appropriate pumping station, please complete the following form. Once completed click on the ‘Send Form’ button located at the bottom of the page. We shall then select the most suitable system from our full range to fulfill your requirements.

Should you require any guidance on completing this form please contact our Sale Department who will be glad to help. We aim to reply within 24 hours with a full quotation.

CONTACT DETAILS
Company Name:
Company Address:
Post Code:
Telephone: *
Fax:
E-Mail: *
Contact Name: *
Project Ref.:
Site Address:
Site Post Code:
Application:	Domestic Commercial Other If other, please state:

PROPERTY SPECIFICATIONS
Number of Properties	Please select 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Total Number of Bedrooms
Total Number of Appliances	No.
W.C.
Wash Hand Basin
Bath
Shower
Bidet
Utility Sink
Washing Machine
Dishwasher
	Please indicate daily flow rate (if known)   Please select litres per second litres per minute cubed metres per hour
Are additional gravity drained toilet facilities available?	Yes No
Special Requirements	e.g. swimming pool, laundry etc Please indicate daily flow rate for special requirements (if known):   Please select litres per second litres per minute cubed metres per hour
Is surface water to be combined with the foul water pumping station?	Yes    No
If a separate surface water pumping station is required, please indicate below:
Surface Type	Area (m sq)
Roof
Car Park
Paved Yard
Lawn Area
Other (please state)
Please indicate daily flow rate (if known)	Please select litres per second litres per minute cubed metres per hour
If a holding capacity is required, please state	Please select litres cubic metres
(A) Depth from ground level to lowest invert level (in metres) (B) Difference in level between lowest invert level and discharge level into outfall chamber (in metres) (C) Total distance from pump chamber to outfall chamber (in meters) If there is a high point between the pump discharge and outfall chamber, please state the distance: (in metres)
Rising Main	New   Existing If existing, please state main material Please select MDPE HDPE Cast Iron Ductile Iron
Internal diameter of rising main (in mm)
Inlet size	Please select 100 mm 150 mm 200 mm 250 mm
Number of Inlets
Electrical supply available	Please Select 240v Single Phase 415v Three Pahse
Distance from control panel to pump station (in metres)
Will pumping station be located in a hazardous area, and as such require explosion proof pumps?	Yes   No
All control panels come complete with the following as standard: Direct on line start, IP54 Enclosure, Overload fitted to suit particular pump motor, Hand/Off/Auto selector switch (es), High Level Audible alarm with mute button, Door locking isolator, Visual indication for: 'pump(s) running', 'pump(s) tripped', 'high level', 24vAC output connection for remote beacon (to indicate high-level), Klixon connections.(All control panels offered in 3 or 4 float setup).
Extras Required - please select below:
Hours Run Meter
Ammeter
BMS Connection
Telemetry Unit
IS Relays (Ex. Proof)
Remote Beacon
Warning Beacon
Other (please state)
If there are any imposed flow limits into the outfall chamber, please state maximum outflow:	Please select litres per second litres per minute cubed metres per hour
Must the total storage capacity be confined to the pumping chamber?	Yes    No
If No, please state available capacity upstream from the pumping chamber. (in litres)
If the pumping station will be adopted please state the adoptive authority.
Time Frame:	Please select 0 - 4 weeks 4 - 12 weeks 12 plus weeks
Notes:
To ensure that a person, not an automated program, is filling this form, please enter the characters you see in this picture. All letters will be shown in their capitalized form. Characters:
Reset   Send Form